900 L4-1985cc 2.0L DOHC (1986)
Suspension Strut / Shock Absorber: Service and Repair
Rear Suspension
Fig. 1 Typical rear suspension assembly
EXC. EMS & TURBO
1.
Raise vehicle and remove wheel.
2.
Remove shock mounting hardware at both ends, Fig. 1.
3.
Remove shock absorber from vehicle.
4.
Reverse procedure to install.
Fig. 1 Typical rear suspension assembly
EMS & TURBO
1.
Raise and support vehicle at rear jacking point.
2.
Position an additional jackstand under rear axle to prevent it from dropping and stretching brake lines.