900 L4-1985cc 2.0L DOHC (1986)
Repair Details:
1.
Remove the wheel cover(s) from the car.
2.
Clean the inside of the wheel cover.
3.
Re-align the two halves.
4.
Select four spots to be glued, equally spaced around the edge of the wheel cover.
Clean these spots with Loctite Safety Solvent.
5.
Apply Loctite 290 at the four areas that have just been cleaned. Allow Loctite 290 to set up for one hour before moving the car.
Special Note:
When installing wheel covers, index recess to the tire valve stem. If label is incorrectly positioned in relation to the recess, remove the
label to prevent confusion later on.