900 L4-1985cc 2.0L DOHC (1986)
b. Secure the cable sheathing to the lever housing.
6
Adjust the gear selector cable as follows:
a. Withdraw the gear selector cable as far as possible (position P).
b. Press the cable in two notches (position N).
c. With the lever housing securely mounted in the floor console, move the selector lever to position N and tighten the setscrew to the specified
torque.
7
Perform a final check. Tightening torque: 2.5 Nm (1.8 lbf ft)