900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
*
It will be necessary to supply an extra ground to the new switch. To accomplish this, make a short jumper wire with a two piece snap
connector 95-59-998/95-60-004 at one end and a non-insulated terminal 30-24-098 at the other. Connect the jumper wire to 592 SV and plug
into pos. 8.
Wiring diagrams for all 900 electrically operated sunroofs can be found in Sec. 3.2, pg. 266 of the 900 Service Manual.
2.
Complete the installation of the new console using a new sunroof switch 95-50- 617.
