900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
6.
Install new pad "U" pins (Figure 5). The "U" pin has a preset bend which can be altered by heat and hard use. The "U" pin controls vibration and
locates the pads properly in the caliper. Note the different "U" pins for ventilated and non-ventilated brake calipers.
Pad "U" Pin (solid disc)
89-90-194
Pad "U" Pin (ventilated disc) 91-00-108
Install the retaining clip through the "U" pin.
FIGURE 6 - SET HAND BRAKE BEFORE PUMPING UP THE BRAKES.
7.
Pull up the hand brake lever 7 notches. Start the engine and pump the brake pedal until the hand brake lever will operate in 9-10 notches. See
Figure 6.
8.
Road test the car to verify correct brake function but do not overheat the pads with repeated braking.