saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Heater Valve - New Spare Part Installation|Page 1387 > < Heater Valve - New Spare Part Installation
Page 2
background image

installation emergency arise in the meantime.

Installation Advice

Install the new heater valve as described in Section 8 (p. 854-7) of your 900 Service Manual.

If the car is equipped with Hella cruise control (M84 and later Factory installed type) do not forget to re-fit the chain guard for the cruise control servo.
The chain guard slips over the screws (5 mm x 20 mm) used to secure the valve to the heater core. Be sure that the screws are long enough.

Install a new throttle pedal arm (89-90-913, 1984-85-1/2 only) and check for free throttle pedal operation.

Heater Valve - New Spare Part Installation|Page 1387 > < Heater Valve - New Spare Part Installation