900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
5
Release the control rod from the valve.
6
Fit the 0-rings to a new valve and secure them in position with a dab of gasket compound.
7
Fit the valve. Fit the control rod when the temperature control is in the shut-off position and the flat surface on the plastic stem of the valve points
upwards (valve closed).
N.B. The mounting holes in a new valve are not tapped. The screws are thread-forming (self-tapping).
8
Connect the coolant hoses in the engine compartment to the valve.
9
Top-up with coolant, and pressure-test and vent the system. Check it for tightness.
10 Fit the defroster grille and the bottom section of the facia.
