900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
Camshaft: Service and Repair
Removal and Installation of Camshafts
1. Remove the valve cover.
Flywheel Timing Marks-Bellhousing Removed
2. Set the engine to TDC by rotating the crankshaft in normal engine rotation until the "0" mark on the flywheel is aligned with the timing mark on
the end plate.
Camshaft Timimg Mark Aligned With Mark On Camshaft Bearing Cap
Note: Check also that the marks on the camshafts are aligned with their matching marks on the bearing caps. If the marks are not aligned, turn the
engine over an additional 360° (1 revolution).
Caution: If the camshaft timing marks shown be are not exactly aligned, the timing chain or one of the sprockets may be severely worn or the timing
chain may have jumped out of position. See Timing Chain for additional information.
3. Remove the ignition distributor.
