900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
As from 1984 models, the pulley incorporates three grooves; cars with air conditioning have an auxiliary bolted-on pulley.
Use tools 83 92 961 and 83 93 639 to remove the pulley from the engine in car.
Use special spanner 83 92 961 and a torque wrench when fitting the pulley with engine in car.
To obtain the correct torque at the bolt, the tightening torque must be adapted to the length of the torque wrench.
Torque wrench
Tightening
length
torque
L = 300 mm (12 in)
55 Nm (40 ft lb)
L = 400 mm (16 in)
70 Nm (52 ft lb)
L = 500 mm (20 in)
80 Nm (59 ft lb)
6. Remove the locking segment and fit the belt (belts).