900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
Air/Fuel Mixture: Adjustments
1.
Remove protective cap from idle mixture adjusting screw.
2.
Start and operate engine until normal operating temperature is obtained.
3.
Connect CO meter No. 8393597 and test cable No. 0280701 or equivalents, on to righthand wheel housing test socket.
4.
Note reading obtained. If CO is within limits, value obtained should vary between 0 and 100%.
5.
If reading obtained is not as specified, turn idle mixture adjusting screw until correct reading is obtained.
6.
When readings are within specifications, check and adjust idle speed and install protective cap onto idle mixture adjusting screw.
