saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Recall - Fuel Hose Position Inspection|Page 2296 > < Recall - Fuel Hose Position Inspection
Page 2
background image

"Expected No."
On Status List

No. Hoses

No. Seals

0 - 49

1

2

50 - 99

2

4

100 - 150

3

6

150 +

4

8

Dealers will be debited for the initial supply at dealer net. Contact your servicing parts depot if you do not receive your initial parts by May 24. Re-order
after the start of the campaign as campaign activity dictates.

Subsequent Orders

Phone or Mail Orders for additional hoses and seals to the Parts Sales Office of your servicing Saab depot. Identify all such orders as follows.:

Order Type - "VOR" Special Instructions - "Recall 265"

For fastest handling, order VOR. Do not order recall parts on a stock order.

2.

Inspecting Car with "Long Style" Fuel Rail

Measure the distance from the upper forward air conditioner mounting bolt to the fuel hose. The distance must, be 1/16" (1-2 mm). If incorrect,
adjust the hose by loosening the hose securing hardware at both ends and re-tightening. Use two wrenches, one to turn the bolt and one to secure the
fuel rail or fuel pressure regulator. The hose must not have any unusual bends or twists which can lead to hose damage and it must not rest against
any engine bolts, brackets or other components.

Replace the hose and the seals only if hose damage exists. Start the car and check for leaks.

Recall - Fuel Hose Position Inspection|Page 2296 > < Recall - Fuel Hose Position Inspection