900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
Pressure Transducer: Testing and Inspection
Checking the pressure transducer
Tools:
Pressure gauge 83 93 514
Hose with connector (included with the pressure gauge)
Air pump (radiator tester)
Vacuum pump
Ohmmeter
1. a. Check the transducer by unplugging the connector from the APC control unit and measuring the resistance between terminal 9 (green/red;
CN/RD) and terminal 8 (black; SV).
Note: To preclude damage to the connector, apply the rest prods to the same side as that on which the cables enter the connector.