900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
Remove the gaiter from between the front and rear centre consoles. Remove the centre console.
b. Remove the lower section of the safety padding.
c. Disconnect the pressure transmitter hose at the Y connector. Connect the pressure gauge equipment to the hose from the pressure transducer.
As from 1986 models:
First, remove the cover from the electrical connector. Measure the resistance between terminal 23 (black/white; SV/VT) and terminal 10
(green/red; GN/RD).
Note: To preclude damage to the connector Y, apply the rest prods to the same side as that on which the cables enter the connector.
Note: Keep the pressure gauge vertical to avoid erroneous readings.
