900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
Control Arm: Service and Repair
Upper Control Arm Replace
Fig. 3 Typical front suspension
1.
If left hand control arm is to be replaced, remove engine and transmission assembly as outlined under ``Engine, Replace'' in ``Engine.''
2.
Remove top shock absorber nut, raise and support vehicle, and remove wheel and shock absorber, Fig. 3.
3.
Compress coil spring using tool No. 8995839 or equivalent.
4.
Remove bolts securing upper ball joint to control arm and support steering knuckle.