900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
5. Fit the bearing support to the primary chaincase. Coat both bolts with thread sealing compound.
6. Place the circlip in the upper sprocket and then press the bearing into the sprocket (see figure). Use sleeve 87 90 859. Fit the circlip for the outer
race of the bearing into the sprocket with the chamfer facing outwards.
7. Fit the chains onto the sprockets and fit the sprockets onto their corresponding shafts in the primary chaincase.
Fit the two circlips.