900 L4-1985cc 2.0L DOHC Turbo EFI (1985)
Shifter M/T: Adjustments
With New Ext Gear-Change Mechanism For 4/ 5-Speed Gearboxes
A new external gear-change mechanism has been introduced on 4-speed and 5-speed gearboxes within the chassis numbers listed below:
As from AC1009986 up to and incl. 1009555
As from AC1009688 up to and incl. 10010081
As from AC2002819 up to and incl. 2002997
As from AC1019986
As from AC2007012
As from A03006959, 4-speed
As from AC3007496, 5-speed, carburettor engine
As from AC3007759, 5-speed, injection engine
As from AC6001776
As from BC6008945
TO ADJUST THE GEAR POSITIONS
1. Engage reverse gear.
2. Release the clamp on the selector rod universal joint, so that the selector rod can move inside the universal joint.
3. Lock the gear lever in the reverse position by inserting a 6 mm (1/4 in) diameter screwdriver or drift into the locating hole in the gear lever
housing and selector rod. The locating holes are accessible when the cover over the gear lever housing has been removed.