900 L4-1985cc 2.0L SOHC (1988)
Cruise Control Switch: Technical Service Bulletins
Cruise Control Switch - Replacement Revisions
FILE IN
VOL.
S.I. Man.
I
SEC.
PG.
A-3
117
Issue:
12/89-1201
Supersedes:
03/89-1122
Subject:
Cruise Control Switch Replacement
Application:
1984-88 900 Models With Cruise Control
The original stalk switch for the 1984-88 900 cruise control, P/N 85 83 536, is no longer available. For replacement purposes, kit 85 47 960, which
contains the 1989 style switch and new electrical connectors, must be used. Detailed below are the steps that must be followed when replacing the
original switch.
Parts Required:
Cruise Control Switch Kit
P/N 85 47 960
^
Stalk Switch P/N 95 65 623
^
Splice Connector P/N 95 59 998
^
Splice Connector P/N 95 60 004
^
4-Pin Connector P/N 91 23 W5
^
Pins (4) P/N 91 20 957
Cruise Control Switch Kit Installation Procedure
1.
Disconnect the negative lead from the battery and cover the terminal post.
2.
Remove the lower steering-column cover.
3.
Pull the left hand air duct and the sound insulation that is just behind the knee pad down and out of the way.
4.
Cut the tie strap that secures the cruise control wire harness to the steering column.
5.
Remove the bracket which holds the direction indicator and wiper switches.
