900 L4-1985cc 2.0L SOHC (1988)
Throttle Valve Cable/Linkage: Service and Repair
Replacement
1
Disconnect the cable from the throttle and from its attachment to the retaining plate.
2
Drain the fluid from the automatic transmission and remove the front bottom cover.
3
Remove the throttle cable using a 10 mm swivel socket spanner and pressing it out from the inside. Check that the cable sheathing is secured to the
end pieces.
4
Fit the new cable by pressing it into the transmission casing. Hook it onto its cam on the control valve. Make sure that the cable is correctly
positioned on the guide pulley.
5
Keeping the cable straight, tension it until the cam moves. Using a pair of pliers, clamp the stop clip onto the threaded part of the cable.