900 L4-1985cc 2.0L SOHC Turbo VIN S FI (1984)
not overlook this important step as vibration in the yoke can cause brake squeal.
FIGURE 3 - SPRING CLIP. ORIGINAL AND NEW STYLE.
3.
Install a new style spring clip (P/N 91-03-995). Spring clips purchased from the spare parts supply have different dimensions from the clip
originally fitted to the caliper. See Figure 3.
FIGURE 4 - PAD INNER/OUTER COMBINATION.
4.
Turn in the pistons and install the semi-metallic 2-pad combination which was introduced into the spare parts system from 07/86. This is the same
combination of pads installed from the beginning of M87 new car production. See Figure 4.
Brake Pad Outer (DM 121)
91-02-690
Brake Pad Inner (Textar 474) 91-02-708
Do not substitute aftermarket brake pads.
Note! See Service Information 07/86-862 on installing brake pads. Proper installation is critical to prevent brake piston over-adjustment and
possible brake drag.
FIGURE 5 - INSTALL DAMPER SPRING AND PAD "U" PIN.
5.
If the car is more than 1 year old, install new damper springs (P/N 89-30- 448) as shown in Figure 5.