saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Power Window Switches - Sticking|Page 4369 > < Diagram Information and Instructions|Page 4360
Page 1
background image

Power Window Switch: All Technical Service Bulletins
Power Window Switches - Sticking

SUBJECT:

STICKING POWER WINDOW SWITCHES
M84 TURBO, 900S MODELS

ISSUE:

06/84-690

FILE IN S.I. MANUAL:
VOLUME:

I

SECTION:

3

PAGE:

79

On occasion the power window switches on M84 Turbo and 900S models may stick in the depressed position. If this occurs, the following repair may be
made to the switch.

1.

Gently pry the small panel which houses the switches from the center shift console.

Remove the window switch from the switch panel.

2.

Disassemble the switch from the top as shown. If additional access is required, the bottom of the switch may be disassembled in a similar fashion.

Keep the switch upright during your work! Otherwise the contacts may come out of position.

Power Window Switches - Sticking|Page 4369 > < Diagram Information and Instructions|Page 4360