900 L4-2118cc 2.1L DOHC (1992)
3.
Remove the vacuum tank and its vacuum hoses. Plug the hose connection on the intake pipe and the nipple on the pressure pipe by means of
rubber plug P/N 83 35 614 (figure 3).
4.
Fit a new LH ECM, P/N 02 42 172 (see figure 4).
5.
Remove the existing emission control label (using a heat gun), clean the surface and affix a new emission control label on the left-hand inner
fender in front of the fuse box (figure 5).
