900 L4-2118cc 2.1L DOHC (1992)
Oxygen Sensor: Description and Operation
Oxygen Sensor (Lambda Sond)
PURPOSE
The oxygen sensor (lambda sond) senses the oxygen content in the exhaust and sends a voltage signal to the fuel injection ECM.
Under normal conditions, the optimum air/fuel mixture ratio is 14.7kg air to 1kg fuel. The ratio is monitored by measuring the exhaust gas oxygen
content.
LOCATION
The oxygen sensor is mounted in the exhaust manifold.
CONSTRUCTION
The sensor consists of a steel housing, heating stem (element), sensor tip and its protective sleeve. The sensor tip itself is made from a platinum
covered zirconium-oxide pipe.
OPERATION
The oxygen sensor produces a measureable voltage by comparing the amount of oxygen in the exhaust gas with the amount in the ambient air.
The sensor operates within a temperature range of approx. 285 - 850°C (545 - 1530°F). It is electrically heated to reach its operating temperature
as fast as possible. When the ignition is turned ON, current is sent to the PTC (positive temperature coefficient) resistor (heating stem) whose
resistance increases as temperature increases.
The exhaust gases reach the outer surface of the oxygen sensor tip via the openings in the protective sleeve. Ambient air reaches the sensor's inner
surface via channels. The differance in oxygen content produces a voltage read by the ECM.
