900 L4-2118cc 2.1L DOHC (1992)
Stabilizer Bushing: All Technical Service Bulletins
Sway Bar Bushings - Groaning, Squeaking Noise
CATEGORY
Suspension
SECTION
7
PAGE
5
ISSUE
03/92-0201
CODE
762
Subject:
Noise From Sway Bar Bushings
Application:
Certain 1992 900 Models
On early 1992 900 models (-N2015364), which were produced on line 2, the lubricating grease that was installed for the sway bar bushings was of the
incorrect specification. Consequently, after driving a few miles the grease is "consumed" and gives the impression that none was ever installed. This
leads to a "groaning" or "squeaking" when accelerating, braking or going over bumps.
To correct customer complaints of this noise, remove the sway bar to gain complete access to the bushings. Only use grease, P/N 00 26 575.
Warranty Information:
For warranty claims, use Failure Coding 76212-42-5-01-05. Labor Allowance is Operation No. 76210 (R & R Sway Bar) for 0.8 hour.