900 L4-2118cc 2.1L DOHC (1992)
Suspension Spring ( Coil / Leaf ): Service and Repair
Rear Suspension
Fig. 1 Rear Suspension Assembly
1.
Raise and support vehicle, then remove rear wheels.
2.
Remove parking brake cable bracket from spring link.
3.
On models with antilock brakes, release ABS lead from clips and brackets.
4.
On all models, position a jack under spring link, Fig. 1.
5.
Support spring link with a jack and remove lower end of shock absorber.
6.
Remove nut and bolt from spring link rear mounting.
7.
On vehicles with anti roll bar, disconnect anti roll bar and swivel bar down.
8.
On all models, position another jackstand under rear axle. Ensure care is taken not to damage brake lines.
9.
Slowly lower jackstand under spring link, then remove coil spring.
10.
Reverse procedure to install, torquing all bolts and nuts to specifications.
