900 L4-2118cc 2.1L DOHC (1992)
5
Undo the securing bolts for the upper and lower ball joints on the wishbones.
6
Pull the steering swivel member away from the lower wishbone and swivel it up to enable the drive shaft to be withdrawn.
7
Withdraw the drive shaft and fit covers to the rubber gaiter and driver cup.
Drive Shafts to Fit
Note: Take care to remove all dirt and dust particles.
1
Remove the temporary covers from the driver cup and rubber gaiter.
2
Pack the driver cup with 115 g of Mobil GS57C grease.
3
Insert the shaft in the driver cup.
4
Tighten the clip on the gaiter on the inboard universal joint.