9000 L4-1985cc 2.0L DOHC (1986)
FIGURE 2
7.
Using the 2 #8 x 1" sheet metal screws provided, mount the junction box to the bottom of the glove box. Install the screws from inside the glove
box (see fig. 2).
8.
Route the control cables to the junction box and connect them as described in the phone installation manual.
9.
Cut a 3" x 4" section out of the felt panel, to expose the speaker grille of the junction box when the felt panel is reinstalled.
10.
Install the felt panel and the 6 securing screws.
11.
Complete the phone installation per the installation manual.
