saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Wood Dash - Installation|Page 4706 > < Diagram Information and Instructions|Page 4701
Page 1
background image

Dashboard / Instrument Panel: Technical Service Bulletins
Wood Dash - Installation

FILE IN.: S.I. Man.

VOL.: I

SEC.: B-9

PG.: 13

ISSUE: 01/90-1210

SUBJECT: 
Wood Dash Inlay Installation

APPLICATION: 9000

Due to the thick coat of varnish on the fascia of the wooden dash insert, P/N 02 44 475, It may sometimes be difficult to refit the covers below the heated
seat rheostats and fog light switch (A) and the storage compartments (B) (Figure 1).

CAUTION

Never attempt to trim or modify the wooden dash insert itself in any way. The coat of varnish is very likely to crack or craze if disturbed.

TRIMMING PROCEDURE:

Cover

File or cut away the side edges and lightly trim the tabs at the rear of the cover as shown in Figure 2.

Storage Compartment

Wood Dash - Installation|Page 4706 > < Diagram Information and Instructions|Page 4701