saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Glovebox Door - Correcting Alignment|Page 4713 > < Wood Dash - Installation|Page 4708
Page 1
background image

Glove Compartment: Technical Service Bulletins
Glovebox Door - Correcting Alignment

FILE IN S.I. Man  VOL. I

SEC. B-8  PG. 19
Service Information

SUBJECT:

CORRECTING GLOVEBOX DOOR ALIGNMENT            ISSUE: 06/87-972

APPLICATION: M86 AND EARLY M87 9000 MODELS
A service kit is now available to allow adjustment of the glovebox door on M86 and early M87 9000 models. This adjustable glovebox door was also
introduced from VIN Serial No. H1022780.

Glovebox Service Kit

96-98-309

Installation Procedure

1.

Lower the door by depressing the stops located near the hinge points.

2.

Release the glovebox light and lower into the compartment.

Remove the six screws for the glovebox compartment and, using a small screwdriver, apply careful leverage to release the fresh air vent clips as you
withdraw the compartment. Note the position of the two spring clips.

On earlier cars there is another spring clip on the upper edge of the fresh air vent.

3.

Disconnect the electrical leads from the light housing and the door switch.

Glovebox Door - Correcting Alignment|Page 4713 > < Wood Dash - Installation|Page 4708