9000 L4-1985cc 2.0L DOHC (1986)
11. When the new chain has been installed so that only a few links are still resting on the camshaft sprocket on the inlet side, protect the area
surrounding the chain with a cloth. Remove the old chain link and chain (See Figure 7).
12. Using a chain link, join the ends of the new chain together and pull the chain around until the link is midway between the legs of the chain support
(See Figure 7).
13. Remove the chain link, fit a new chain lock. (See Figure 8) and
-
Check that the inserts marked with a "2" are fitted in the tool. Then, place the plate of the chain link in the tool and fit it over the link on the
chain.
-
Press the plate in place with a force of 10 Nm (7.4 ft lb).
