9000 L4-1985cc 2.0L DOHC (1986)
Air Door Actuator / Motor: Service and Repair
Servomotor, Air Recirculation Flap, Changing
To Remove
1
Remove the rubber strip and the cover over the bulkhead space.
Disconnect the washer hose.
2
Free the right-hand shield plates.
3
Open the clamp over the A/C lines.
4
Remove the two evaporator casing securing screws.
5
Lift the evaporator casing a couple of centimeters forward to gain access to both the servo motor retaining screws.
6
Undo the servo motor retaining screws.
7
Unplug the connector and pull out the servo motor.