9000 L4-1985cc 2.0L DOHC (1986)
8. Detach the control panel by pressing in the four securing lugs and pulling it into the cabin. Make sure that the temperature control is set to position
0.
9. Detach the air distributor rod. Detach the temperature control cable gear from the control panel.
10. Remove the cover from the ventilation fan filter/evaporator casing.
Remove the clip from the valve shaft in the engine compartment and detach the cable.
11. Remove the bracket complete with cable and clip from heating and ventilation unit. Detach cable from bracket.
12. Detach cable from temperature control gear.
13. Attach cable to valve shaft in engine compartment.
14. Fit a new cable to the bracket. Note dimension for cable sleeve, 19-21 mm.
15. Fit bracket complete with cable to heating and ventilation unit.
16. Fit cable to gear. Note dimension for cable sleeve, 7-8 mm.
17. When fitting gear to control panel:
