9000 L4-1985cc 20L DOHC (1986) Evaporator Core Service and Repair
To dismantle
15
Remove fresh air filter.
16
Remove the screw securing the desiccant container and unplug the desiccant container connection from the expansion valve.
17
Remove the insulation so that the clip securing the sensor can be undone. Detach the capillary tube and expansion valve connections from the
evaporator.
Important : Plug all open connections immediately.
18
Remove the anti-freeze thermostat.
19
Remove the recirculation flap motor.
20
Cut the seal in the evaporator casing partition surface.
21
Remove the clip holding the evaporator casing together. Open the casing and lift out the evaporator.
To assemble