9000 L4-1985cc 2.0L DOHC (1986)
NOTE:
^
Fit new 0-rings to the connections. Lubricate 0-rings with synthetic vaseline.
^
Fit the sensitive body to the evaporator output. Make sure that contact is good. Carefully insulate the sensitive body.
6. Fit the desiccant container. Do up all connections.
7. Check that electric cables are correctly positioned in the car.
8. Lift the evaporator casing into position in the can Center it so that the seal is correctly positioned against the fan housing. Fit the evaporator casing
screw. Make sure that the evaporator casing draining pipe is correctly positioned on the housing as illustrated.
9. Plug in fan control connections, air recirculation flap motor, anti-freeze thermostat and the desiccant container pressure switch. Fit the cover over
the anti-freeze thermostat.
10. Refit all parts which have been removed.
11. Fill the system with refrigerant. For more information refer to "Draining and Filling of Refrigerant". See: Refrigerant/Service and Repair
12. Carry out a performance test.
