9000 L4-1985cc 2.0L DOHC (1986)
Control Module HVAC: Service and Repair
ACC Control Module, Changing
Removal:
1. Switch off the ignition.
2. Remove the ashtray.
3. Pull the ashtray holder forward by bending down the two upper locking tabs.
4. Press out the control module from behind.
5. Unplug the 25 pin connector.
Installation
1. Plug in the connector.
2. Place the control module in position.
3. Clip in the ashtray holder and the ashtray.
4. Carry out user programming as required by the customer.
