9000 L4-1985cc 20L DOHC (1986) Maintenance Alignment System Service (Page 523)
MEASURED BETWEEN RIMS
Use the table according to the following example.
1. Assume that the tracking gauge gives a reading of 0.5 toe-out.
2. Find this value in the toe-out section of the first column and follow the line across to the second column, that gives the number of required turns:
"0.5 out". This means that together the two track rods must be rotated 0.5 turns, that is to say each track rod should be rotated 0.5 turns outwards
or counterclockwise.
Locknut tightening torque 70 Nm (52 ft. lbs.)