9000 L4-1985cc 2.0L DOHC (1986)
Fuel Injector: Customer Interest
Engine - Stalling/Poor Starting/Loss of Power
FILE IN S.I. Man VOL. I
SEC. B-1 PG. 19
Service Information
SUBJECT:
SYSTEM FOR TESTING AND CLEANING ISSUE: 10/86-904 ELECTRONIC FUEL INJECTORS
NEW REQUIRED TOOL
APPLICATION: ALL 9000 MODELS
A new system for testing and cleaning the fuel injectors on vehicles with the 16 valve engine has been introduced. This system can be used to address
complaints such as stalling, poor starting and loss of power resulting from contaminated injectors.
The Saab system features on exclusive 2.0 bar pressure relief valve and fittings, dedicated instructions and Balance Test capabilities using pressure
gauge from the tank.
A complete set of injecter cleaning equipment (including on case of cleaning solution) will be sent to your dealership during early December and your
account charged accordingly.
Saab Injector Cleaner/Tester P/N 83-94-264
Access Fitting 900*
P/N 83-94-280
Access Fitting 9000*
P/N 83-94-298
1 Case Cleaning Solution
P/N 83-94-272
*Contained in 83-94-264
Instructions for the use of this equipment is contained on the pressurized container and in Service Information 10/86-901 (900) and 10/86- 902 (9000).
Do not attempt to use this equipment before you have become familiar with its use.
Pricing Information (dlr. net)
