9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
Control Assembly: Description and Operation
Panel Functions Front A/C
1.
AUTO button
Selects AUTO working mode, and the ACC control module maintains the apparent cabin temperature constant and at the desired level. The LED
tights in AUTO working mode and stays lit even when the electrically heated rear window, rear door fans and air recirculation flap are manually
activated and deactivated. In the case of other manual selections, the LED goes out.
The ACC system always starts in the AUTO working mode, provided it has not been otherwise programmed,
2.
ECON button
Prevents the A/C system and recirculation being engaged. Other features are automatically controlled. The ECON LED lights.
3.
Display
A display shows the set cabin temperature 17 - 27 °C (62 - 81 °F).
The button under this allows either 0 °C or 0 °F to be selected.
The LO position, below 17 °C (63 °F) provides air through the facia vents. The temperature valve is closed.
HI position, above 27 °C (89.5 °F) gives reduced fan speed and heat to floor and defroster. Fully open temperature damper. Raising or lowering
cabin temperature.
One press gives 1 °C or 2°F.
4.
°C/°F button
Switches display temperature to °C or °F.
5.
Temperature buttons
Increasing or decreasing desired cabin temperature. Set temperature shown on display.
