9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
13. Close the cock to the blue low pressure hose on the pressure gauge.
14. Press "START" to start charging of refrigerant.
15. Stop the charging process by pressing "HOLD" when about 200 grammes of refrigerant has been filled.
16. Move the A/C hoses slightly and check that the system is not leaking using a leakage detector for R12.
17. Continue the charging process by pressing "START". When charging is complete, the display on the control panel shows "CPL".
18. Close the cock to the red high-pressure hose to the pressure gauge.
19. Start the car and wait until the compressor starts working. Pressure on the low-pressure side should be between 1.0 - 3.0 bar and check that the
radiator fan switches on between 10.5 - 14.5 on high-pressure side.
20. Remove the connections 6n the compressor and refit the protective plugs over the service valves.
