9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
5 Check that battery voltage is present on relay terminals 30 and 86.
If it is not, check that the lead to the positive terminal block is OK.
6 Ground terminal 85 and check that battery voltage is present on terminals 87 and 87B.
If it is, continue as described in point 7.
If it is not, change the main relay.
7 Check the lead from relay terminal 85 to LH control module pin 21 and the lead from relay terminal 87 to fuel pump relay terminal 86 (via the
pressure switch, LH 2.2 turbo engine) and the lead from relay terminal 87B to the mass air flow sensor's:
pin 2
(-M1987 fuel injection engine, -M1988 turbo engine)
pin 5
(M1988- fuel injection engine, M1989- turbo engine)
