saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Track Rod Ends <--> [Tie Rod End]|Specifications|Page 3747 > < Removal/Installation|Page 3742
Page 1
background image

Track Rod Ends: Specifications

DIMENSIONS

Distance:

 [1] ................................................................................................................................................................................................  140 mm (5.51 inch)
 [2] ....................................................................................................................................................................................................  2 mm (0.08 inch)

Track Rod Ends Wear Limit:

Axial Play .........................................................................................................................................................................................  2 mm (0.08 inch)
Radial Play .........................................................................................................................................................................................  1 mm 0.04 inch)

[1]: Maximum distance between the locknut and the edge of the groove for the gaiter on the track rod.
[2]: Maximum permitted distance between this distance on both sides of the car.

TIGHTENING SPECIFICATIONS

Ball Joint Castle Nut .............................................................................................................................................................................  55 Nm (42 ft. lbs.)
Locknut .................................................................................................................................................................................................  70 Nm (52 ft. lbs.)

Track Rod Ends <--> [Tie Rod End]|Specifications|Page 3747 > < Removal/Installation|Page 3742