saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Removal and Replacement|Page 3829 > < Removal and Replacement|Page 3827
Page 3
background image

REMOVAL

1. Remove the parcel shelf, if necessary.
2. Remove the rear light covers.
3. Remove the rear unit.
4. On cars with motor driven radio antennas the cover for this should be removed.
5. Remove the floor of the luggage compartment.
6. On 4 door models, unfasten the rear hatch absorber from its lower mounting.
7. Unfasten the carpeting at the rear edge and move it out of the way to expose the upper securing point of the damper.
8. Remove the nut, washer and bush from the upper securing point of the absorber.
9. Lift the car and remove the rear wheel.

10. Unload the rear axle slightly by positioning a jack under the rear axle.
11. Remove the bolt from the lower damper bracket.

IMPORTANT:  If the anti-roll bar bush is damaged it should be changed.

12. Lower the jack under the rear axle.

IMPORTANT:  Ensure that the flexible hose is not damaged.

Removal and Replacement|Page 3829 > < Removal and Replacement|Page 3827