9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
Rear Link Arm Bushing: Service and Repair
Rear Bush (Bushing)
REMOVAL
1. Elevate the car.
2. Remove the wheel.
3. Position a jack under the link arm. Remove the bolt on the link arm bracket.
4. Remove the hand brake wire, and if necessary the ABS cable, form the link arm.
5. Slowly lower the link arm using the jack and remove the spring.
6. Clean the bush and surrounding area. Put Vaseline on the exposed areas of the bush. Use the tool according to the picture.
7. Press out the bush with tool No. 89 96 506, or equivalent.
IMPORTANT: The threads of the tool, and the nut and washer should be well lubricated.
