9000 L4-1985cc 2.0L DOHC Turbo EFI (1987)
Band: Service and Repair
PUSHROD FOR ADJUSTING BRAKE BAND C
NOTE: Component identifier numbers used in the following illustrations relate to specific steps in the procedures below.
Removal
1. Remove the valve body cover and valve body.
2. Undo the locknut on the adjusting screw
-
Wrench size 22 mm.
3. Unscrew the adjusting screw
-
Allen wrench size = 6 mm.
4. The dowel can now be pushed out using a suitable drift.
