9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
7. Rotate the crankshaft to bring the bearing caps for No. 1 and No. 4 cylinders into the position where they can be checked. Repeat steps 4 - 7
inclusive for No. 1 and No. 4 bearings.
8. Remove the main bearing caps one at a time and inspect the caps and the crankshaft.
NOTE: The bearing caps must be installed with the identifying numbers facing forwards.
9. Lubricate and install the bearing caps and tighten to 20 Nm (15 ft. lbs.). Then tighten a further quarter-turn (through 90 degrees).
10. Install the oil pan.
