9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
Piston Ring: Service and Repair
INSTALLING PISTON RINGS TO PISTONS
^
Use the piston ring clamp (special tool) to fit the rings as shown. The lower compression ring must be fitted with the side marked TOP
uppermost.
^
Oil the piston and rings before assembly. Position the compression rings so that the gaps are at approximately 180° to each other, each
positioned above one of the gudgeon pin holes. Also make sure that the gaps in the top and bottom pieces of the three-piece oil scraper ring are
staggered round the piston, and not in line with one another.