9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
Exhaust Crossover Pipe: Service and Repair
REMOVAL
1. Disconnect the oxygen sensor cables and raise the car.
CAUTION: Do not twist the cables. The oxygen sensor is sensitive to blows and impacts and must be handled with care.
2. Remove the oxygen sensor.
3. Undo the joint between the front pipe and the exhaust pipe. Unhook the rubber hanger from the body.
4. Unbolt the front exhaust pipe from the turbocharger and lift down the pipe between the engine and the front engine compartment member.
INSTALLATION