saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Door Cable, HVAC|Service and Repair|Page 6288 > < Air Door Actuator / Motor, HVAC|Removal|Page 6284
Page 1
background image

Air Door Cable: Service and Repair

1. Fully lower the glove compartment flap by bending out the link arms so that the stops are released. Full down the glove compartment light.
2. Remove the glove compartment together with the facia vent by undoing the six screws. Using a screwdriver, carefully pry along the edge of the

facia vent. Note position of clip. Unplug cables to glove compartment fight and light switch.

NOTE:  Cars equipped with passenger airbag: Remove the upper part of the facia.

3. Remove door trim seals from A pillars and remove A pillar trim.
4. Remove loudspeaker grilles. Remove screws from the top of the facia. Remove the top of the facia by lifting up its front edge and pulling it into

the cab so that the clips come loose.

5. Undo the screws and pull the electrical distribution box down.
6. Remove the air ducts to the outer facia vent and defroster. Unscrew the windscreen defroster.
7. Remove the ashtray. Pull the ashtray holder forward by bending down the two upper securing lugs.

Air Door Cable, HVAC|Service and Repair|Page 6288 > < Air Door Actuator / Motor, HVAC|Removal|Page 6284