9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
2.
Using a sharp knife, cut a section of the plastic hose 140-150 mm as shown in Figure A.
3.
Using fuel line grip 83 94 546, fit two connecting nipples in the plastic hose as shown in Figure B.
4.
Connect two rubber hoses and fit four spring clips as shown in Figure A.
5.
Fit the pulsator and adjust the spring clips to the correct position.
6.
Reconnect the return line.
7.
Check that there is sufficient clearance around the damper and fuel line. Refit the inlet hose to the throttle housing.
8.
Refit fuse # 14 and restart the engine. Verify that there are no leaks.
Warranty Information:
For warranty repairs where the owner is not satisfied with the repair in PSI 10/91-0145, use Failure Coding 24143-71-0-01-10. Labor time allowance is
Operation No. 24143 (0.2 hours). Add 0.1 hour in straight time for B234 Naturally aspirated vehicles.
