9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
Important: Note the position of the 0-rings in the throttle body.
1 Inspect the mating surfaces and 0-ring. Fit the throttle body.
2 Connect the throttle cable.
Cars with automatic transmission: Also connect the kick-down wire.
3 Only cars with automatic transmission:
Check and adjust the kick-down wire, see page 241.
4 Connect the crankcase ventilation, idle air control valve and throttle body preheater hoses.
5 Plug in the throttle position sensor connector.
6 Fit the hose between the throttle body and mass air flow sensor.
7 Check the coolant level and top up as necessary.
