9000 L4-2290cc 2.3L DOHC Turbo EFI (1992)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor (not ETS)
Removal
1 Unplug the connector from the position sensor.
2 Disconnect the thick crankcase ventilation hose from the throttle body.
3 Undo the bolts securing the position sensor and remove the sensor.
Fitting
Check that the 0-ring is correctly positioned and fit the sensor on the throttle spindle.
Connect the thick crankcase ventilation hose.
Plug in the connector.